How do I check the firmware and hardware version of Model 3501 Type-C SuperMUTT?

How do I check the firmware and hardware version of Model 3501 Type-C SuperMUTT?

MUTT Software helps you to check the Model 3501 firmware and hardware version,
Please download and install the MUTT software package from the Microsoft Website.

After install, Traverse to the directory
C:\Program Files (x86)\USBTest\x64

From the directory, run the below command to find the hardware and Firmware version.
CMuttUtil.exe /list

It will return the SuperMUTT’s VID&PID, Firmware version and hardware version.


    • Related Articles

    • MCCI Model 3421 Users Guide

      The MCCI® Model 3421 is a USB-to-HDMI converter device that runs with Basic Display Protocol (BDP) developed based on the USB/VESA joint specification. The MCCI Model 3421 has a USB micro-B port for control, a Type C port & a Micro HDMI port to act ...
    • MCCI Model 3411 Users guide, Windows Drivers & Test Tools

      The MCCI Model 3411 has two USB ports -- a micro-B port for control, and a Type C port that is the test device. Use of the control port is optional. If left open, the 3411 will get power from the Type C port. If a charger is attached to the control ...
    • Model 2411 Traduci - Firmware Update Procedure

      Model 2411 Traduci setup The steps to update/upgrade the firmware of the Model 2411 Traduci board are as follow: Connect the Traduci board with your system using the USB A to B Cable. Traduci board is enumerated as a serial device (Make sure that) If ...
    • How do I update the firmware on Model 3501 to version 45?

      When running HLKs, you may see the following warning message: Type-C MUTT firmware version: 43, minimum required: 45 This will be followed by an error: Type-C MUTT firmware is out of date, please update to the latest available version and re-run the ...
    • Model 3501 Type-C SuperMUTT does not enumerate as a SuperSpeed device

      The Model 3501 includes a Cypress FX3 chip that is intended to provide the same functionality as the Microsoft SuperMUTT. The firmware for the FX3 is provided by Microsoft (as part of the package available here). In the firmware provided as part of ...